flock

A small, opinionated Kubernetes CNI built around three ideas:

1. Dual-stack, IPv6-friendly. Every pod gets a globally routable IPv6 address by default. IPv4 is also enabled by default; either family can be turned off per-node or per-pod when you really mean to.
2. No tunnels, no NAT. Pod addresses are the real packets on the wire. Each node speaks BGP to its upstream router and advertises its own per-node prefix. The pod network is just the LAN, plus host routes.
3. Anycast as a primitive. A pod can request an anycast address via an annotation; flock binds it on the pod's loopback and advertises a /128 (or /32) over BGP, but only while the pod is Ready. Multiple replicas advertise the same address from different nodes for ECMP load balancing without a separate Service or external LB.

flock is built for clusters where every node already speaks BGP to one or more upstream routers. It deliberately leaves out features you'd expect from a general-purpose CNI — overlays, IPsec/Wireguard, IPAM coordination across nodes, kube-proxy integration — so the moving parts that remain are easy to reason about.

Status: alpha. CRD shape and annotation keys may still change.

Table of contents

• How it works
• Requirements
• Quickstart
• NodeConfig CRD
• Pod annotations
• Use cases
• Comparison vs Calico / Cilium
• Limitations and non-goals
• Building and testing
• License

How it works

Each node runs a single flock-agent DaemonSet pod with three containers:

• a privileged init container (flock-installer) that drops the CNI plugin binary into /opt/cni/bin/flock and writes /etc/cni/net.d/01-flock.conflist,
• the agent itself, which owns IPAM, programs veth pairs, and tracks pod readiness, and
• a BIRD2 sidecar that the agent re-renders and reloads when the per-node config or the active anycast set changes.

Each node has a NodeConfig CR (cluster-scoped, name = node name) that declares its IPv6 and IPv4 prefixes, its local BGP ASN, and its upstream peers. The agent reads the CR via a dynamic informer.

When kubelet runs the CNI plugin on ADD, the plugin opens a unix-socket RPC to the agent. The agent allocates an address from the per-node CIDRs, creates a veth pair, configures the pod side, persists the allocation to /var/lib/flock/allocations.json, and returns the result. There is no controller loop and no IPAM coordination across nodes — each node owns a non-overlapping CIDR and allocates locally.

For anycast, the agent installs <anycast-ip> via <pod-eth0-ip> dev <veth> host routes on the node and adds the anycast IP to BIRD's BGP export filter. When a pod loses readiness, the agent withdraws the route from both the kernel and BGP within one reconcile cycle (sub-second).

Packet path

pod.eth0 (a veth) ↔ host-side veth (with addrgenmode none, fe80::1/64, proxy-ARP for the v4 default-via) ↔ host kernel ↔ uplink NIC ↔ upstream router. No conntrack, no SNAT, no encapsulation.

For IPv6 the host side of every veth carries the deterministic link-local gateway fe80::1, so every pod can use a fixed default route. For IPv4 the host side answers ARP for 169.254.1.1, providing the same fixed default route in v4.

Requirements

• Linux nodes. flock has not been tested on, and does not target, Windows nodes.
• Kubernetes ≥ 1.27.
• An upstream router (or pair) that accepts a BGP session from each node. flock has been tested with Cisco IOS-XE, Arista EOS, and FRR acting as the upstream; anything that speaks standard eBGP should work.
• Globally routable (or at least datacentre-routable) IPv6 prefix delegated to the cluster, sliced into a per-node /64. IPv4 is optional but supported.
• Each node must have a unique local ASN. Private ASNs (64512–65534, 4200000000–4294967294) are typical.

Quickstart

# 1. Install CRD + RBAC + DaemonSet (single bundled manifest):
kubectl apply -f deploy/install.yaml

# 2. Label the node(s) you want flock to manage:
kubectl label node <node-name> flock.fritzlab.net/agent=

# 3. Apply a NodeConfig CR for that node (see "NodeConfig CRD" below):
kubectl apply -f my-nodeconfig.yaml

# 4. Verify the agent is up:
kubectl -n kube-system get pod -l app=flock-agent -o wide
kubectl -n kube-system exec -it ds/flock-agent -c bird -- \
    birdc -s /run/flock/bird.ctl show protocols

The DaemonSet is gated by the flock.fritzlab.net/agent node label, so unlabelled nodes continue to use whatever CNI was installed before. This lets you migrate node-by-node — start with one node, prove it works, then proceed.

NodeConfig CRD

A NodeConfig is the only operator-supplied input. One per node, name matches the node name. Example:

apiVersion: flock.fritzlab.net/v1alpha1
kind: NodeConfig
metadata:
  name: node-a
spec:
  cidr6:
    - 2001:db8:f001::/64       # Pods on this node get addresses from here.
  cidr4:
    - 192.0.2.0/24             # IPv4 pool, used only when a pod opts in.
  defaults:
    ipv6: true                 # Optional. Built-in baseline if omitted.
    ipv4: true                 # Optional. Built-in baseline if omitted.
  bgp:
    asn: 65101                 # This node's local ASN.
    peers:
      - address: 2001:db8::1   # Upstream router (IPv6 session).
        asn: 65000
      - address: 192.0.2.1     # Same router, IPv4 session.
        asn: 65000

spec.defaults

spec.defaults controls which address families a pod gets by default on this node — i.e. when the pod has no explicit flock.fritzlab.net/ipv6 or flock.fritzlab.net/ipv4 annotation. Pod annotations always override. If you omit spec.defaults (or any individual field inside it) flock falls back to its built-in baseline of dual-stack (IPv6 on, IPv4 on).

Goal	spec.defaults
Dual-stack (the default)	omit, or { ipv6: true, ipv4: true }
IPv6-only node	{ ipv6: true, ipv4: false }
IPv4-only (legacy node)	{ ipv6: false, ipv4: true }

A NodeConfig that resolves to "neither family" is rejected at allocation time, so misconfiguring both to false will surface as an error on the first CNI ADD.

spec.bgp

Each peer becomes one BGP session. The agent picks a node-local source address on the same subnet as the peer; if there isn't one, BIRD uses its default. Multi-homing (multiple peers per family — or per upstream router pair) is allowed.

Pod annotations

All annotations live under flock.fritzlab.net/. Every annotation is optional; leave them off to inherit the per-node defaults.

Annotation	Type	Purpose
flock.fritzlab.net/ipv6	bool	Override spec.defaults.ipv6 for this pod (true/false).
flock.fritzlab.net/ipv4	bool	Override spec.defaults.ipv4 for this pod (true/false).
flock.fritzlab.net/cidr6	CIDRs	Restrict IPv6 allocation to a sub-range of the node's cidr6. Comma-separated.
flock.fritzlab.net/cidr4	CIDRs	Restrict IPv4 allocation to a sub-range of the node's cidr4. Comma-separated.
flock.fritzlab.net/ip-algo	list	Embed identity into the IPv6 IID. Subset of namespace,pod,image, in order, comma-separated.
flock.fritzlab.net/anycast	IPs	Bind these IPs on the pod's lo; advertise via BGP while pod is Ready. Mixed v6+v4 ok.

Bool values must be the literal strings "true" or "false" (case-insensitive, surrounding whitespace tolerated). Other values — 1, 0, yes, no — are rejected so a typo can't silently flip behaviour.

Example pods

Default dual-stack — no annotations needed:

apiVersion: v1
kind: Pod
metadata:
  name: minimal

IPv6 only — opt out of the default v4 allocation:

apiVersion: v1
kind: Pod
metadata:
  name: v6-only
  annotations:
    flock.fritzlab.net/ipv4: "false"

Operator-friendly addressing — fnv(namespace) | fnv(pod) | random packed into the host bits, so a pod's identity is recognisable from its IP in kubectl get pods -o wide:

metadata:
  annotations:
    flock.fritzlab.net/ip-algo: "namespace,pod"

Anycast service — three replicas, each advertising the same v6+v4 anycast pair from the node it lands on. The upstream router does ECMP across the active set:

apiVersion: apps/v1
kind: Deployment
metadata:
  name: dns
spec:
  replicas: 3
  template:
    metadata:
      annotations:
        flock.fritzlab.net/anycast: "2001:db8:a::53, 192.0.2.53"
    spec:
      containers:
        - name: coredns
          image: coredns/coredns
          readinessProbe:
            httpGet: { path: /ready, port: 8181 }
            periodSeconds: 1
            failureThreshold: 1

Use cases

Highly-available DNS. Run N CoreDNS replicas, each annotated with the same anycast IP. Point client /etc/resolv.conf at the anycast address. Each replica advertises a /128 from its own node; the upstream router does ECMP. Lose a pod, traffic fails over within a probe cycle.

Replacing a kube-proxy ClusterIP. Headless Service plus an anycast IP gives you a single stable address with load-balancing across pods, without the DNAT-pinning that makes long-lived TCP keepalive connections stick to one backend forever. ECMP routes each new flow independently.

Per-pod public IPv6. Because every pod has a globally routable IPv6 address and the cluster does no NAT, a pod's eth0 IP is reachable from the rest of the internet (subject to your firewall). Useful for things like outgoing SMTP, where you want a stable from-address per pod, or for peer-to-peer protocols that don't tolerate NAT.

Fast pod identification in kubectl. With flock.fritzlab.net/ip-algo: namespace,pod the IPv6 host bits encode the pod's namespace+name, so you can recognise a pod from its IP without a lookup. Reverse-DNS via a wildcard zone makes those IPs human-readable too.

Static-IP migration. Annotation-driven address allocation means you can ask for a specific sub-CIDR (cidr6: 2001:db8:f001::ab00/120) for services that previously needed pinned IPs (mail server, ingress controller). When the static-IP requirement goes away, drop the annotation and the pod gets a normal allocation.

Comparison vs Calico / Cilium

	flock	Calico	Cilium
Default address family	dual (IPv6+IPv4)	IPv4	dual
BGP	yes (BIRD)	yes	optional
Overlay (VXLAN/IPIP)	never	optional	yes (geneve) or native
NAT in datapath	never	masquerade by default	masquerade by default
Anycast pod addressing	first-class	manual	optional, via service mesh
eBPF datapath	no	optional	yes
NetworkPolicy	yes (nftables)	yes (Felix)	yes (eBPF)
Cluster size target	small (< 100 nodes)	thousands	thousands
Operational surface area	low (1 DaemonSet, 1 CRD)	medium	high
Production-ready	alpha	yes	yes

flock is not trying to compete with Calico or Cilium. The right answer for most clusters is one of those two — flock exists for clusters where every node already speaks BGP, the operator wants real (no NAT) IPv6 addressing on every pod, and per-pod anycast is something they actually want to use rather than work around.

Limitations and non-goals

• NetworkPolicy supports networking.k8s.io/v1 (ingress + egress, all three peer types, numeric ports + port ranges). Named ports and AdminNetworkPolicy are not yet implemented.
• No NAT, no masquerade, no SNAT-egress. Pods reach the wider internet using their real cluster-routable addresses; if your IPv4 pool isn't routable beyond your network, those pods can't reach v4-only hosts on the public internet without help from your border router.
• No multi-cluster, no peering across clusters.
• Linux-only datapath.
• IPAM is per-node — there's no global allocator and no IP mobility. When a pod moves to a different node it gets a new address.
• The agent is privileged. It mounts /var/run/netns, configures veth pairs, manages kernel routes, and holds CAP_NET_ADMIN. This is inherent to being a CNI; reducing privilege further is not a goal.
• If BIRD dies but the agent stays up, pods on that node stop being reachable from off-node. The DaemonSet liveness probes catch this.

Building and testing

# Unit tests + fuzz seed corpora (fast, ~1s):
go test ./...

# Targeted fuzz pass:
go test -run NEVERMATCH -fuzz=FuzzParseAnnotations -fuzztime=30s ./pkg/agent
go test -run NEVERMATCH -fuzz=FuzzRender           -fuzztime=30s ./pkg/routing/bird
go test -run NEVERMATCH -fuzz=FuzzEmbed            -fuzztime=30s ./pkg/embed
go test -run NEVERMATCH -fuzz=FuzzIPAM_Allocate    -fuzztime=30s ./pkg/agent

# Build the container image (used by the DaemonSet):
docker build -t flock:dev .

The fuzz tests are also run as plain unit tests via their seed corpora, so every go test ./... exercises the discovered edge cases as regressions.

pkg/agent has Linux-only files (*_linux.go) for netlink and netns work; the macOS/Windows build pulls in stubs from *_stub.go so tests run cleanly on developer laptops.

License

Apache 2.0 — see LICENSE.